Morimoto XB LED Headlights Amber DRL
2014+ Toyota 4Runner
Looking to completely transform the front end of your 4Runner? The stock headlights are not bad, all things considered, but these put them to shame. Mid-Atlantic Off-Roading is proud to carry Morimoto® headlights, allowing you to light up the night and transform the look of your rig.
TOYOTA 4RUNNER: 2014+ (Note: 2021+ Models require optional adapters (be sure to select either Limited/TRD or Non)
NOTE ABOUT DRL TAP: Some 2020+ models cycle the injector circuit on without the vehicle in use. In these instances, use the IGN2 Fuse.
REPLACES TOYOTA PART #: 81170-35571, 81130-35541, 8117035571, 8113035541
COMPLIANCE: DOT, SAE, FMVSS108 STANDARDS
NOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.
NO SUBSTITUTES: Still running oldschool halogen headlights on your Fifth Gen Toyota 4Runner? Halogen Bulbs? HID Kit? LED bulbs? It doesn't matter-- because if its not XB LED, then its just behind the times! The Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. Easily making them the best LED headlights on the market today for the 4Runner aftermarket
SECOND GEN UPDATE: The 4Runner XB headlights broke the mold when they came out as the first set of performance aftermarket headlights for the 4Runner... but some early adopters weren't 100% satisfied with the light output. In true Morimoto fashion, nothing gets left alone for long and that's why now the new Gen 2 version is in distribution! Here, the game is changed yet again with the introduction of the full Amber DRL model, which simply couldn't be more appropriate on a 4Runner decked out with Amber LEDs.
MORE LIGHT OUTPUT: The original 4Runner XB's used 2 projectors for low beam, and one dedicated high beam. The new setup utilizes all three projectors for the low beam, and has a dual Bi-LED setup. The results? 33% more light output for low beam mode, 100% more output in high beam mode, and a better distribution of light with more foreground (on the ground directly in front of the truck) for improved visibility while cornering. Asked and answered!
START-UP SEQUENCE: And if the optical upgrades weren't enough, the badass start up sequence has been added too. When the Daytime Running light kicks on, the projectors illuminate in a two-stage sequence before turning back off in. A video is worth a thousand words here... so make sure to watch the one embedded in the listing to see that in action! While it does absolutely nothing for performance, you can't deny the cool-factor!
DOT APPROVED: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet & exceed all SAE, DOT, and FMVSS108 regulations when aimed properly... and that's easy to do with their integrated vertical/lateral adjusters.
PLUG-N-PLAY: Wiring is easy too! The LED headlights are designed to work on your Toyota 4Runner without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty.
SEQUENTIAL LED DRL: Game Changer! Their LED daytime running light is powered by Osram LEDs and even the amber one is insanely bright, easily visible during the day. A separate optic that's dedicated to the turn signal function uses amber LED's to produce a full sequential turn signal. For those who are a bit more traditional, the turn signal can also be setup to run as solid on/off style too.
WELL-BUILT: Their UV-coated polycarbonate lens will resist the test of time, ensuring your truck's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring.
OEM PLUS: We live, eat, and sleep headlights. While the 4Runner LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes "you pay for what you get". We've seen it all, and their fit and finish is far superior to everything else out there. Guaranteed.
THEY LOOK: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered top of the line original equipment to those who don't know any better. The piano black trim and smoked gray reflectors keep the color scheme neutral, and the triple kuria-optic projectors are as modern as it gets.